Motor Control Centre (MCC)
Motor control centres with fixed or draw-out starter feeders that start, protect and control the motors in your plant from one panel.
PLC Panel
Motor Control & Automation
PLC Control Panel
PLC-based control panels that automate sequences, interlocks and monitoring for pumps, plant equipment and DG synchronisation.
- Controller
- PLC sized to your I/O list
- Operator interface
- HMI or push buttons, as required
- Operating voltage
- 380 / 415 / 440 V AC, 3-phase, 4-wire
- Frequency
- 50 Hz
Overview
A programmable logic controller (PLC) panel runs your equipment to a set logic: starting and stopping in sequence, enforcing interlocks, raising alarms and showing status. It replaces bulky relay logic with a system that is easier to change and troubleshoot.
We build PLC panels for pump and process control and for auto DG synchronisation, wired and tested in our factory before dispatch.
Key features
- PLC sized to your I/O list
- HMI or push-button operator panel, as required
- Interlocks, alarms, and auto/manual modes
- Ferruled and labelled control wiring
- Can integrate VFDs, soft starters and MCC feeders
Technical specifications
| Parameter | Value |
|---|---|
| Controller | PLC sized to your I/O list |
| Operator interface | HMI or push buttons, as required |
| Operating voltage | 380 / 415 / 440 V AC, 3-phase, 4-wire |
| Frequency | 50 Hz |
| Short-circuit rating | Up to 50 kA for 1 s (CPRI-tested); higher on request |
| Degree of protection | Up to IP55 (CPRI-tested) |
| Internal separation | Up to Form 4 |
| Sheet steel | CRCA, 2 mm or 1.6 mm as specified |
| Surface finish | 7-tank pre-treatment, powder coated up to 100 microns |
| Busbars | Aluminium, TPN, rated to the load |
| Standard | IS/IEC 61439-1 and 61439-2 |
Applications
- Water and sewage pumping
- Process lines
- DG synchronisation
- HVAC plant rooms
FAQs
Related panels
VFD / AC Drive Panel
AC drive panels built around variable frequency drives to control motor speed, save energy on pumps and fans, and give smooth starting.
Soft Starter Panel
Soft starter panels that ramp motors up gradually to cut starting current, voltage dips and mechanical shock on pumps, compressors and conveyors.
Have a BOQ or single-line diagram?
Send it today for an itemised quote on your panels.